Watchfunclub.gr

IN-DEPTH: A Look Inside Omega's Historic Museum (We Promise You'll See Some Stuff You've Never Seen Before)



Earlier this week, I had the pleasure of visiting Omega's renovated museum space across the street from the brand's headquarters in Biel, Switzerland. Omega has a history that stretches back to 1848 and the museum tells the story of one generation to the next with great pride and impeccable curation. With a brand that conjures images of James Bond, Astronauts and the Olympics, it's easy to overlook its modest founder and historic manufacturing abilities. The museum handles the task well though, devoting space and attention to each chapter in the company's evolution. In the museum you will see some of the most important Omegas ever made - the watches that made it into outerspace, those that were part of the Alaska project, those that were issued by the British military, and even a few from COMEX.

From the outside, the museum would be easy to miss were it not for a small sign behind a bush showing the Omega's original logo. The ground floor serves as a lunch room for headquarter employees, the only hint at the museum upstairs is a replica moon rover under the stairs. Once upstairs however, the space opens up to three areas, one for the company's beginnings and manufacturing abilities, one for historical models and the last for modern examples.

Browsing the collection yields a few surprises and untold stories, thanks to the museum's highly knowledgable manager, Brandon Thomas. One pleasant surprise was a 1947 tourbillon movement, which is in fact the very first tourbillon movement ever made for a wrist watch. Also on full display are their advancements made in precision timing devices, many made specifically for use at the Olympic games. From the pool mounted pads for timing the swimmers, to the cameras that put the timing line right on the TV, each has a place of its own.

After a spot of lunch with Omega President, Stephen Urquhart (who was surprisingly candid about the brands aspirations and future plans), we were allowed access to a portion of the museum collection for handling and photographing. See a selection of my photographs after the break.

If you're an Omega fan, you will appreciate the experience that Omega has created with their new museum. All but the most hardened of experts will find the visit educational and insightful to the vast history of Omega. Next time you find yourself in Switzerland, put this place on your "must see" list.


Olympic starting gun.


The very first Alaska Project watch, with polished titanium case.


Olympic timing device.


Janus II prototype COMEX Ploprof


Moon watch (literally) exhibit


A Speedmaster that's seen time in space.


A seldom-seen Omega tourbillon


A British Military Seamaster


Rare "Genta" style Seamaster

http://www.hodinkee.com/blog/2011/11/21 ... e-you.html

αυτα ειναι...... ....

Τρελλα!

Αμαν!

Omega Tourbillon Watches



According to Omega they were the first wrist watch brand to place a tourbillon escapement based movement into a wrist watch. This was back in 1947. I am by no means going to discuss what a tourbillon is or its history in this article. Suffice it to say however that the ancient complication designed by Breguet back in his lifetime was originally meant to be in pocket watches.

It was not until the mid 20th century that tourbillons found themselves in wrist watches. For Omega, it was a limited production piece that only had 12 movements ever placed in cases and sold. The 1947 movement was designed as a competition movement for the Swiss Observatory Chronometry competition. It was thought that applying a tourbillon to a modern movement would help further increase its accuracy and give it that edge to win the famous competition where brands would submit movements to see which was the most accurate.



Omega won that year with its tourbillon based watch movement (which oddly enough had more in common with older pocket watch movements as opposed to more modern wrist watch movements). Like I said, a few (12) were actually put in cases and sold to customers. One of those pieces is shown here in this article. A simple looking watch, it just says “Omega Tourbillon” on the dial and rest should be up to the wearer to understand. The movement itself is nothing fancy in appearance. It is a very industrial looking movement – super accurate and with a tourbillon. It was called the Omega caliber 30I and the tourbillon made one revolution each seven and a half minutes. Seeing (and wearing) it in person was a thrill.

Later in wrist watch history tourbillon-based wrist watch movements became the popular thing for the wealthy elite. Not so much because of what they offered performance-wise, but more because of their visual appearance and complicated nature. Omega was actually at the cusp of the neo-tourbillon watch crazy that seemed to start in the early 2000s, but actually started a bit earlier. Omega’s first modern tourbillon movement was released for sale in 1994. I had no idea it was that early.



Since then Omega has steadily produced a handful of tourbillon watches each year. And by handful I mean it. If my recollection serves me right Omega’s tourbillon watch production is something like 10 watches per year. That is almost nothing compared to the brand’s larger production volume. So why do they do it? According to Omega they like to keep the tourbillon production workshop open to continue part of the brand’s history and offer something special. It is a passion department as sale of the tourbillon timepieces aren’t really a money maker for the brand. The watch makers who produce these timepieces have their own area at Omega and really just do their own thing in comparison to the other “volume production” areas of Omega.

The Omega tourbillon watch released in 1994 (the Omega calibre 1170) was interesting for at least two reasons. First, it is a central tourbillon. This means that the tourbillon carriage is placed in the center of the dial. Second, the Central Tourbillon is an automatic. If I had to add a third special quality it would be that the hour and minute hands are applied via metallization to sapphire crystal discs (think something similar to Quinting – though I think Omega’s practice predates them). So the seconds via the tourbillon were at the center, and the minute and hour hands were applied on spinning sandwiched sapphire crystals.



The Omega Central Tourbillon watches are all placed in DeVille cases (this far) and are in precious materials. From 1994 – 2010 Omega released about seven variations of the tourbillon movement. In 1997 the movement grew up a bit to become the Caliber 2600A. What really changed was the application of the automatic winding system that was now part of the movement itself. The watch designs were of course changed as well.

In 2002 after a bit of a break Omega came out with the Calibre 2600B. This movement improved upon the 2600A by having it be COSC Chronometer rated. Later in 2004 the Calibre 2600 was skeletonized for the Caliber 2633A Omega Central Chronometer Skeleton Tourbillon watch. Moving forward in 2007 Omega’s technology of today met its tourbillons by including the Co-Axial Escapement as part of the tourbillon. That step really helped thematically integrate the Central Tourbillon with the rest of the brand’s in-house made movements. That was the Caliber 2635A and was placed in a watch with an amusing name called the Omega Central Chronometer Co-Axial Tourbillon Chocolate (because of the dial). Last, as I am sure you can guess, Omega once again added a skeletonized look to the most modern Omega Central Chronometer Co-Axial Tourbillon watch with the Caliber 2636A for the longest named watch (these names just keep getting words added to them), the Omega Central Chronometer Co-Axial Skeleton Tourbillon watch.



And there is our brief history of Omega’s Central Tourbillon watch. So what is this piece all about? Of course the main idea was to create a symmetrically pleasing dial that featured a tourbillon mechanism. Doing that made it impossible to have centrally mounted hands. This meant that the hands would have to be mounted elsewhere – hence whey the sapphire place system is used. The plates sit around the tourbillon and are driven by a small ring-like gear around the bezel of the watch. This also seems to cause a complication in how you adjust the time. Pretty much everything about this watch is uniquely quirky.

For one thing you actually turn the crown counter-clockwise versus clockwise to wind it (but don’t forget that it is an automatic). Nothing major, but still a quirk. To adjust the time there is another flat crown mounted on the caseback. You need to pull it out a bit then and use it to turn the two sapphire crystal discs that indicate the minutes and hours. Cool and weird at the same time in my opinion.



Omega likes to play with the decorative elements on the watch. An especially nice area for art is the plate underneath the tourbillon. This plate is routinely machine guilloche engraved to offer a beautiful look that you need to seek out under the tourbillon while it is spinning. Speaking of which, machine guilloche engraving is what makes up most of my favorite Omega Central Tourbillon watch. A very discreet model with no brand name on the dial. All there is to remind you it is an Omega is the brand logo placed in as part of the tourbillon carriage.

The model I am referring to is pictured in this article, but I am not sure which specific model number it is. The watch has an 18k rose gold case and totally hand-machine guilloche engraved dial done in a very traditional manner. The Central Tourbilon is very visible as are the blue hour markers and hands. In this case the contrast between the blue markers on the sapphire crystals and the dial is very high. This makes reading these solid dial models a pleasure.



My main complaint on the skeletonized pieces is that the hour and minute hands are often very difficult to spot – making legibility less than optimal. Omega actually tried to remedy this as much as possible by using a complex metallization technique that applies a rounded metal markers on the sapphire crystal (as opposed to flatter ones), but it does not help enough. This is most an issue because on the skeletonized pieces the mostly gold hands blend in with the dark gray and gold movements too much. I have a feeling I know what Omega is going to work out next in their Central Tourbillon watch collection.

Wearing these watches makes me feel very special. They are models that almost no one knows about from a brand that almost everyone knows about. I think of them as being “secret Omegas” for the educated brand lover. How much do they cost? I was told in the range of about $80,000 each. Look for more of these special Omega Central Tourbillon watches to come each few years and production to remain low and steady for only the most passionate brand collectors.

http://www.ablogtoread.com/omega-tourbillon-watches/

Ωραίος Μαριε...Ευχαριστουμε!

Δε μου αρεσουν που δεν μου αρεσουν τα ''τρυπια'' καντραν,βαλανε και την ''τρυπα'' στο κεντρο φατσα καρτα...νομιζεις οτι θα σε ''ρουφηξει'' οταν πας να δεις την ωρα


ΥΓ.Παντως αυτο με το tourbillon στο πισω μερος ειναι ωραιο

Νομιζω δεν εχει μπει ξανα.....

Εδω ένα λινκ με pdf με όλους τους μηχανισμους της Omega... απιστευτο λινκ.......

καποια ειναι στα αγγλικα καποια αλλα οχι....

ειδικα σε καποιες μηχανες πχ 3313 απο οτι εχω δει εχει απιστευτες λεπτομερειες......

καλη μελετη........

http://www.cousinsuk.com/document/category/1796.aspx

Ωραίο και χρησιμο λινκ Μαριε!

Πολυ καλο!
Μαλλον πρεπει να το κανεις sticky στα τεχνικα θεματα για να το βρισκουμε ευκολα στο μελλον
Υπαρχει και σε βιβλιο!